- Fanuc Robot M10ia Maintenance Manual Free
- Fanuc M10ia 12
- Fanuc Robot M10ia Maintenance Manual 1
- Fanuc Robot Manuals Pdf
Optimum performance of your robot(s) can be maintained by performing periodic robot preventive maintenance procedures. The following figures are based on up to 3,840 hours of operating time use per year (2 shifts of high use or three shifts of moderate use with moderate demands (a portion of the robot’s motions with full load, a portion with tool only). Note that “operating time” is defined as robot in motion, not just “robot controller on”.
When using the robot beyond this operating time and duty cycle, the correct maintenance frequencies should be calculated in proportion to the difference between the actual operating time and the 3,840 hours/year. While each Mechanical Unit requires different procedures, the following list outlines a basic schedule (for complete information, always refer to your robot’s “Mechanical Unit Maintenance Manual” and “Electrical Unit Maintenance Manual” for detailed maintenance descriptions).
Failure to provide regular robot preventive maintenance can lead to issues including: position deviation, repeatability issues, cable damage, loss of programs, and possible safety issues. If you notice any issues with robot please contact the Motion Controls Robotics’ Service Department at 419-334-5886 for immediate assistance.
- A new generation of advanced technology. The R-30iB Plus controller is FANUC’s new standard for smarter productivity. It is destined to contribute to the easier use of robots and automation in the manufacturing industry.
- Robotic Partition Inserter (RPI) with High Speed FANUC M-10iA/12S Robots - Pearson Packaging Systems. At FANUC America, we put 'Service First.' We're here to service your FANUC product 24/7. Contact Us Flexible Training Options. We offer a wide range of automation training courses designed to fit your busy schedule.
Daily Checks:
- Clean sensors and optics within the robot cell and visually check component parts for damage before daily operation
- Check Mechanical Unit for grease/oil leakage or exudation
First 1-month (320 hours) Checks:
- Ventilation of the robot controller’ cooling fans – keep these clean for efficient air flow
ARC Mate 100iC／100iCe／M-10iA／M-10iAe Mechanical Unit Maintenance Manual(B-82755EN／05) - Free ebook download as PDF File (.pdf), Text File (.txt) or read book online for free.
First 3-month (960 hours) Checks:
- Check Mechanical Unit Cables – free from severe kinks, pinch points, cuts or tears in the wire insulation, check for secure terminations
- Retighten external main mounting bolts
- Clean chips and debris from Mechanical Unit
- Check the end effector or end of arm tool and its’ mounting bolts or screws, tighten appropriately
- Check robot connection cables (T.P. Cable, EE Cable, Vision Cables) – free from severe kinks, pinch points, cuts or tears in the wire insulation, check for secure terminations
1-year (3,840 hours) Checks:
- Grease balancer housing (if so equipped)
1.5-year (5,760 hours) Checks:
- Replace batteries in the mechanical unit (these are backup batteries to maintain the robot’s factory alignments – don’t let these batteries die or you may be in for some unpleasant work to re-zero your robot)
3-year (11,520 hours) Checks:
Fanuc Robot M10ia Maintenance Manual Free
- Replace the grease of each axis. This is not an idle warning – use only the grease recommended by your robot’s manufacturer – the robot controls are sensitive and grease can affect robot motion and operation.
4-year (15,360 hours) Checks:
- Replace the Mechanical Unit cables
- Replace the lithium battery in the CPU
Preventative Maintenance Offer – March to June 2016
What is involved in our preventive maintenance service – Read more
Schedule your PM Today
- gather information and fill-out the downloaded form
- email form to [email protected]
- MCRI will contact you to schedule your 2016 PM service
If you would like help with robot preventive maintenance or service on your FANUC robots, as simple as a routine PM service interval or complete Level II tear down and rebuild of an older FANUC robot model, contact our Customer Service department at 419.334.5886 for a current rate sheet and to set up a visit by one of our Certified FANUC maintenance technicians.
Contact MCRI for a Quote
A FANUC M410/140 robot is used in this robotic palletizing cell to automatically palletize rolls…
Fanuc M10ia 12
MCRI Newsletter Volume 3 - September 2, 2015 Product Spotlight - ErgoPakPal Robotic packing and…
Motion Controls Robotics will be demonstrating the Know-Nos of Robotic Picking, Packing and Palletizing at…
MCRI Value MCRI Value - When deciding to add robotics to your process, selecting a…
You have made it to the third step in the process of adding automation. You…
Proper robotic vision filter selection further facilitates keying in on specific aspects in the vision…
PRESS RELEASE December 17, 2019 Fremont, OH - Motion Controls Robotics, Inc (MCRI) is excited…
Fanuc Robot M10ia Maintenance Manual 1
Robots are being installed in a variety of environments. This requires that the robot be…
M-10iA. FIND YOUR IDEAL ROBOT FOR EVERY FACTORY AUTOMATION NEED. 7 Robots found Payload:12 Kg. Axes:6; Reach:1420 mm. M-10iA/12. Max. payload 12 kg – max. reach 1420 mm FANUC M-10iA the fastest handling robot in its class. Sealed bearings and brushless, maintenance-free AC. Check out the FANUC M-10iA/12 robot available through RobotWorx, new and This protects the cables, makes maintenance easier, and cuts down on the (12) The robot should be transported and installed by accurately following the procedures CONNECTION of controller maintenance manual for details. Fig. Fanuc Robot M-10iA 10S Technical Data Fanuc Robotics Instruction Manual (2); Fanuc Robotics Maintenance Manual (3); Fanuc Robotics Manuals (24) Before using the Robot, be sure to read the 'FANUC Robot Safety Manual .. Connection between the ARC Mate 100iC/M-10iA ARC Mate, 120iC/M-20iA and. End Effector 3.TROUBLESHOOTING. MAINTENANCE. B-82725EN-2/06. - 12 -. FANUC Robot M-10iA is the cables integrated small payload handling robot whose payload is 7 to 12kg. 0 The robot covers the motion range from 1.4m to 2.0m.Ideal for workloads up to 12 kg and envelopes not exceeding 1420 mm. J3 arm for best cable protection, easy maintenance and reduced system costs. This manual explains the maintenance procedures for the mechanical units of the (12) When replacing parts, be sure to use those specified by FANUC. 8 May 2016 Fanuc Robot m10ia Maintenance Manual. download free pdf/ebook/epub Fanuc Robot m10ia chemfax lab 12 answers teacher guide